Dec 17

Christmas Nail Inspo Your Clients Will Love

The holiday season is all about expression! Here are a few Christmas-inspired nail how-to’s from Bio Sculpture that will impress everyone at your holiday parties this year.

Screed Snowflake

 

 

  1. Apply Evo Oxygenating Base. Cure
  2. Apply two layers of Evo Talya. Cure each layer
  3. Follow with a layer of Evo Base. Cure and wipe
  4. Apply Evo Top Coat for shine. Cure
  5. Using an Upper Arch Brush or Nail Art Brush dipped into White Screed create a snowflake design. Cure in between
  6. Use a Dotting Tool dipped into White Screed and place dots around the snowflake design. Cure in between. Once design is completed cure for 60 seconds (30 seconds plus 30 seconds)
  7. Use a Dotting Tool dipped into Evo Base to apply a droplet of gel at the centre of the snowflake. Do not cure
  8. Place a gem onto the wet gel, using a Dotting Tool dipped into Evo Base. Cure and wipe.

 

Large Hanging Bauble

  1. Apply Evo Oxygenating Base. Cure
  2. Apply two layers of Evo Barbie. Cure each layer
  3. Using a Nail Art Brush dipped into Evo Nolene apply a border outline around the nail. Cure
  4. Follow with a layer of Evo Base. Cure and wipe
  5. Using a Nail Art Brush dipped into Evo Pauline create a bauble in the centre of the nail. Cure
  6. Apply Evo Top Coat for shine. Cure
  7. Create the ribbon of the bauble using an Upper Arch Brush dipped into White Screed. Cure for 60 seconds (30 seconds, plus 30 seconds)
  8. Use a generous droplet of Evo Gloss on a no. 4 Round Brush and apply over the bauble design to create a 2D effect. Cure and wipe
  9. Using a Dotting Tool, place a small droplet of Evo Base between the bauble and ribbon design. Do not cure
  10. Place a gem into the wet Evo Base, using the tip of a Metal Pick. Cure and wipe.

White with Silver Snowflakes

  1. Apply Bio Sculpture Base Gel or Evo Oxygenating Base. Cure
  2. Apply two layers of no. 1 colour gel or Evo Whitney. Cure each layer
  3. Follow with a layer of Soft Gel or Evo Base. Cure and wipe
  4. On a Metal Plate decant a small amount of Silver HP Gel
  5. Create the snowflake design using an Upper Arch Brush dipped into Silver HP Gel. Cure
  6. Using an Upper Arch Brush dipped into Silver HP Gel, create lines around the snowflake design. Cure
  7. Using a Dotting Tool dipped into the Silver HP Gel, apply dots on the line design. Cure
  8. Apply Gloss Gel for shine. Cure

 

Dotty Pattern

  1. Apply Evo Oxygenating Base. Cure
  2. Apply two layers of Evo Anastasia. Cure each layer and wipe
  3. Using a Dotting Tool dipped into Evo Amanda, Evo Nolene and Evo Talya, create a dot design alternating colours. Cure in between
  4. Follow with a layer of Evo Base. Cure and wipe
  5. Apply Evo Top Coat for shine. Cure

 

(Credits/Photos: Bio Sculpture) 

×
×